Automatic Sliding Doors

The Redefined Classic

TORMAX automatic sliding door systems provide extensive convenience and flexibility for effortless access without contact with the door. In our extensive product range you will find the right door solution for every building, whether for installation during its construction or for retro-fitting.

Telescopic Sliding Door

Automatic Sliding Doors – Types

Telescope

Telescope sliding doors are suitable for use on every occasion when a large opening width is required but where structural considerations do not permit wide door leaves.

Optional Areas of Use

  • Rescue and escape routes

Additional Functions

  • Air-lock function: two coordinated door systems control access
  • Access control: controlled by a key, badge, video monitoring and biometric data
  • Hold-up closure: on pressing a button the door closes immediately and without reversal
  • Building automation: incorporation into existing systems

Opening Types

Opening to the right -left
Left or right opening
Opening width 700 – 3800 mm

Opening to both sides
Opening both sides
Opening width 1400 – 3800 mm

Profile Systems

Lightweight profile LR12

The elegant TORMAX profile for single sheet glazing, particularly suitable for internal use

  • Facial width 22 mm
  • Base height 80 mm
  • Profile depth 20 mm
  • Glass thickness 6 – 12 mm
  • Glazing method, wet
  • Toughened safety glass/laminated safety glass
  • Sliding leaves sealed at the top and at the sides
  • Safety distance ≤ 8 mm between the sliding and fixed door leaves in accordance with the CEN safety standards

Lightweight profile LR 22B

In spite of its extraordinarily compact design the lightweight frame profile section is ideally suited for insulating glass up to 23 mm in dry glazing and 28 mm in wet glazing

  • Facial width 30 mm
  • Base height 78 mm
  • Profile depth 34 mm
  • Glass thickness
      - dry 8.5 – 10 mm, 21.5 – 23 mm
      - wet     6 – 26 mm
  • Sliding leaf seals: single, all-round
  • Standards met: ZH 1/494prEN 12650 ≤ 8 mm between the sliding and fixed door leaves in accordance with CEN safety standards

Lightweight profile LR 32THERM

Thermally separated sliding door profile LR32THERM

The thermally separated profile has a very narrow and compact design. The circumferential seals reduce the exchange of cold and warm air. This keeps costs down and protects the environment.

  • Visible width: 35 mm
  • with options: 70 mm
  • Base height: 85 mm
  • Profile depth: 40 mm
  • Glass thickness: 32 mm
  • Type of glazing: Insulating, double or triple
  • Sealing of the sliding door leaves: All-round, brushes and/or rubber seals
  • Safety distances: as per DIN 18650

Full-glass solution

TORMAX has developed a special and absolutely secure bolted and adhesive support for glass door leaves which disappears fully into the drive. No fixing points of any nature can be seen externally – the automatic sliding door opens as if by a ghostly hand. Yet another TORMAX contribution to an architecture which is perfection down to the last detail.